My Hugo Timeline

 2022-12-06 -  ~2 Minutes

What follows is an excerpt from this blog’s README.md file.

I’ve successfully added the code to drive a new /timeline page as part of this blog, but I did so “locally”, and now I’d like to repeat the process but using the aforementioned SummittDweller/hugo-timeline   module   .

I used guidance found in Hugo Modules: Getting Started   to make this happen, like so:

╭─mark@Marks-Mac-Mini ~/GitHub/blogs-SummittDweller ‹main› 
╰─$ brew install go
╭─mark@Marks-Mac-Mini ~/GitHub/blogs-SummittDweller ‹main› 
╰─$ brew upgrade   # This is not "required", but probably overdue.

╭─mark@Marks-Mac-Mini ~/GitHub/blogs-SummittDweller ‹main*› 
╰─$ mkdir content/timeline/.out-of-the-way      # vvv Moving existing local stuff out of the way vvv
╭─mark@Marks-Mac-Mini ~/GitHub/blogs-SummittDweller ‹main*› 
╰─$ mv -f layouts/partials/hugo-timeline* content/timeline/.out-of-the-way/.   
╭─mark@Marks-Mac-Mini ~/GitHub/blogs-SummittDweller ‹main*› 
╰─$ mv -f layouts/shortcodes/hugo-timeline* content/timeline/.out-of-the-way/.
╭─mark@Marks-Mac-Mini ~/GitHub/blogs-SummittDweller ‹main*› 
╰─$ mv -f static/css/hugo-timeline* content/timeline/.out-of-the-way/.        

╭─mark@Marks-Mac-Mini ~/GitHub/blogs-SummittDweller ‹main*› 
╰─$ hugo mod init github.com/SummittDweller/blogs-SummittDweller        
go: creating new go.mod: module github.com/SummittDweller/blogs-SummittDweller
go: to add module requirements and sums:
        go mod tidy

Next, to pull in SummittDweller/hugo-timeline   as a module I turned to the config.yml file and guidance found in Hugo Modules: everything you need to know!   . Additions to config.yml are:

module:
  imports:
    - path: github.com/SummittDweller/hugo-timeline
      mounts:
      - source: layouts
        target: layouts
      - source: static
        target: static

Updating the Module

So, all of the above moves appeared to work correctly, at least locally, but I wanted to be sure I can successfully update the hugo-timeline module and get updated behavior in this project. The command required to make that happen per Hugo Modules: everything you need to know!   is:

╭─mark@Marks-Mac-Mini ~/GitHub/blogs-SummittDweller ‹main*› 
╰─$ hugo mod get -u github.com/SummittDweller/hugo-timeline
go: downloading github.com/SummittDweller/hugo-timeline v0.0.0-20221206191252-cd7178e7e43b
go: upgraded github.com/SummittDweller/hugo-timeline v0.0.0-20221206043330-5f1ecbad913f => v0.0.0-20221206191252-cd7178e7e43b

╭─mark@Marks-Mac-Mini ~/GitHub/blogs-SummittDweller ‹main*› 
╰─$ hugo server
port 1313 already in use, attempting to use an available port
Start building sites … 
hugo v0.107.0+extended darwin/amd64 BuildDate=unknown

                   | EN   
-------------------+------
  Pages            | 288  
  Paginator pages  |   9  
  Non-page files   |   0  
  Static files     |  38  
  Processed images |   0  
  Aliases          |  79  
  Sitemaps         |   1  
  Cleaned          |   0  

Built in 90 ms
Watching for changes in /Users/mark/GitHub/blogs-SummittDweller/{archetypes,content,layouts,static,themes}
Watching for config changes in /Users/mark/GitHub/blogs-SummittDweller/config.yaml, /Users/mark/GitHub/blogs-SummittDweller/go.mod
Environment: "development"
Serving pages from memory
Running in Fast Render Mode. For full rebuilds on change: hugo server --disableFastRender
Web Server is available at //localhost:62846/ (bind address 127.0.0.1)
Press Ctrl+C to stop

Eureka! The page rendered at http://localhost:1313/timeline/ after the above hugo mod get -u... command is displaying the latest changes I made to hugo-timeline! Perfect!

---

My work here is done, well, for now anyway.